Ubiquiti UniFi 6 Long-Range Access Point (U6-LR)
Buy UniFi U6-LR Long-Range Wifi Access Point in Kenya from TDK Ubiquiti Store Kenya
Aggregated wireless data transfer speed up to 3.0 Gbps | AP/Hotspot | 2.4/5 GHz | Standards 802.11a/b/g/n/ac/ax is supported | MU-MIMO 4×4 | PoE 802.3at supported | WiFi 6
Adopt the UAP-AC-LR in Minutes with Your UniFi Network Application and:
- Centrally manage multiple networks from an intuitive interface
- Enjoy real-time device insights and deep configuration options
- Upgrade device firmware remotely
- Manage network users and guests with ease
- Personalize the design, architecture, and privacy of guest hotspots
- Set up devices quickly and manage them on the go with a powerful mobile app
U6-LR is a high-performance Access Point leveraging advanced WiFi 6 technology to provide powerful wireless coverage to enterprise environments.
It delivers an aggregate radio rate of up to 3.0 Gbps with 5 GHz (4×4 MU-MIMO and OFDMA) and 2.4 GHz 4×4 MIMO radios. The U6-LR seamlessly blends into any environment and is capable of being mounted in indoor and semi-outdoor environments (IP54 rated).
Features:
1.3 GHz dual-core processor (now upgraded to support full-duplex 1 Gbps TCP/IP performance)
Four-stream high-efficiency Wi-Fi 6 technology
5 GHz band 4×4 MU-MIMO and OFDMA with a radio rate of 2.4 Gbps
2.4 GHz band 4×4 MIMO with a radio rate of 600 Mbps
Powered with 802.3at PoE (PoE injector not included)
Managed by UniFi Network Controller version: 6.0.34 or higher.
Specification:
Mechanical | |||||
---|---|---|---|---|---|
Dimensions | Ø220 x 48 mm (Ø8.66 x 1.89″) | ||||
Weight | Without Mount: 800 g (1.76 lb) With Mount: 930 g (2.05 lb) | ||||
Enclosure Material | Plastic | ||||
Mount Material | SGCC Steel | ||||
Weatherproofing | IP54 | ||||
Hardware | |||||
Processor Specs | Dual-Core® Cortex® A53 at 1.35 GHz | ||||
Memory Information | 512 MB | ||||
Management Interface | Ethernet | ||||
Networking Interface | (1) 1 Gbps Ethernet RJ45 | ||||
Button | Factory Reset | ||||
LED | RGB | ||||
Power Method | PoE+, Passive PoE (48V) | ||||
Power Supply | UniFi PoE Switch 48V, 0.5A PoE Adapter (Not Included) | ||||
Supported Voltage Range | 44 to 57VDC | ||||
Max. Power Consumption | 16.5W | ||||
Max. TX Power |
| ||||
MIMO |
| ||||
Throughput Speeds |
| ||||
Antenna Gain |
| ||||
Mounting | Wall/Ceiling (Kits Included) | ||||
Operating Temperature | -30 to 60° C (-22 to 140° F) | ||||
Operating Humidity | 5 – 95% Noncondensing | ||||
Certifications | CE, FCC, IC | ||||
Software | |||||
Wi-Fi Standards | 802.11a/b/g Wi-Fi 4/Wi-Fi 5/Wi-Fi 6 | ||||
Wireless Security | WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3*) *Supported With Upcoming Controller Versions | ||||
BSSID | 8 per Radio | ||||
VLAN | 802.1Q | ||||
Advanced QoS | Per-User Rate Limiting | ||||
Guest Traffic Isolation | Supported | ||||
Concurrent Clients | 300+ | ||||
Supported Data Rates (Mbps) | |||||
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps | ||||
802.11b | 1, 2, 5.5, 11 Mbps | ||||
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps | ||||
802.11n (Wi-Fi 4) | 6.5 Mbps to 600 Mbps (MCS0 – MCS31, HT 20/40) | ||||
802.11ac (Wi-Fi 5) | 6.5 Mbps to 1.7 Gbps (MCS0 – MCS9 NSS1/2/3/4, VHT 20/40/80/160) | ||||
802.11ax (Wi-Fi 6) | 7.3 Mbps to 2.4 Gbps (MCS0 – MCS11 NSS1/2/3/4, HE 20/40/80/160) |