Ubiquiti EdgeRouter PoE 5-port
The Ubiquiti EdgeRouter PoE 5-Port is a router with passive PoE support for network devices. It is powered by the EdgeOS, which provides various features and options for network configuration . It has a high-performance routing capability of one million packets per second .
It can also be configured to support 24V or 48V PoE on each port, which is useful for powering up multiple Ubiquiti access points .
The EdgeRouter PoE 5-Port offers high-performance, hardware-based switching and PoE capabilities in an affordable and compact 5-port device
The ERPOE-5 EdgeRouter PoE 5-Port Advanced Network Router from Ubiquiti Networks combines reliability with enterprise-level features. Powered by a proprietary and intuitive graphical interface, and EdgeOS, the EdgeRouter can easily be configured for routing, security, and management features to efficiently run the network.
For advanced network professionals, an integrated CLI is available for quick and direct access, using familiar commands. This router is capable of routing up to 1 million packets per second.
Ubiquiti Networks ERPOE-5 Specifications
| TECHNICAL | |
|---|---|
| Processor | Dual core 500 MHz, MIPS64 with hardware acceleration for packet processing |
| System Memory | 512 MB DDR2 RAM |
| On-Board Flash Storage | 2 GB |
| Operating System | EdgeOS |
| NETWORKING INTERFACES | |
|---|---|
| Serial Console Port | 1 x RJ-45 serial port |
| Data Ports | 2 x 10/100/1000 Ethernet router ports 3 x 10/100/1000 Ethernet router/switch ports |
| EDGEOS SOFTWARE SPECIFICATIONS | |
|---|---|
| Interface/Encapsulation | Ethernet 802.1q VLAN PPPoE GRE IP in IP Bridging Bonding (802.3ad) |
| Addressing | Static IPv4/IPv6 addressing DHCP/DHCPv6 |
| Routing | Static routes OSPF/OSPFv3 RIP/RIPng BGP (with IPv6 support) IGMP proxy |
| Security | ACL-based firewall Zone-based firewall NAT |
| VPN | IPSec site-to-site and remote access OpenVPN site-to-site and remote access PPTP remote access L2TP remote access PPTP client |
| Services | DHCP/DHCPv6 server DHCP/DHCPv6 relay Dynamic DNS DNS forwarding VRRP RADIUS client Web caching PPPoE server |
| Quality of Service (QoS) | FIFO Stochastic Fairness Queuing Random Early Detection Token Bucket Filter Deficit Round Robin Hierarchical Token Bucket Ingress Policing |
| Management | Web UI CLI (Console, SSH, Telnet) SNMP NetFlow LLDP NTP UBNT discovery protocol Logging |
| LAYER 3 FORWARDING PERFORMANCE | |
|---|---|
| Packet Size | 64 Bytes 1,000,000 pps 512 Bytes or larger 3 Gb/s (line rate) |
| LEDS PER PORT | |
|---|---|
| Serial Console Port | Power |
| Data Ports | PoE, speed/link/activity |
| POE CONFIGURABLE PER PORT | |
|---|---|
| Data Ports | Off/24 V/48 V* |
| ELECTRICAL | |
|---|---|
| Power Consumption | Maximum: 60 W |
| Power | 24 VDC, 2.5 A power adapter (included) |
| Power Input | 24 VDC input (Supported Range: 18 to 26 VDC) or 48 VDC input (Supported Range: 38 to 54 VDC) |
| Power Connector Size | DC power jack Inner Diameter: 2.1 mm Outer Diameter 5.5 mm |
| PoE with 24 VDC Power Adapter (Included) | PoE Out Voltage Range: 22 to 24 VDC Maximum PoE Wattage Per Data Port: 12 W (24 V) Maximum PoE Wattage Combined for All 5 Data Ports: 50 W PoE Method: Passive |
| GENERAL | |
|---|---|
| Button | Reset |
| Wall Mount | Yes |
| Operating Temperature | 14 to 113°F (-10 to +45°C) |
| Operating Humidity | 10 – 90% (non-condensing) |
| Certifications | CE, FCC, IC |
| Dimensions | 7.87 x 3.54 x 1.18″ (19.98 x 8.99 x 2.99 cm) |
| Weight | 12.7 oz (360.0 g) |
To set up your EdgeRouter PoE 5-Port, you can follow these steps:
- Connect an Ethernet cable from the Ethernet port of your computer to the port labeled eth0 on the EdgeRouter PoE .
- Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet (e.g., 192.168.1.100) .
Brand
Ubiquiti
Be the first to review “Ubiquiti EdgeRouter PoE 5-port”
You must be logged in to post a review.
Reviews
There are no reviews yet.