BlueSolar MPPT 150/60 (12/24/36/48v-60A)

With the Controller BlueSolar MPPT 150/60 Tr You can charge a solar battery with a lower rated voltage from a PV plate with a higher rated voltage. In addition, EL controller will automatically adjust to the rated voltage of the battery at 12, 24, 36, or 48 V. The BlueSolar MPPT 150/60 Tr Maintains an Exceptional conversion efficiency. No fan and maximum efficiency exceed 98%.

Flexible Load algorithm

• Fully programmable load algorithm (see the Software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch (see the Manual for details).

Extensive electronic protection

• Protection against excess temperature and power decrease when the temperature is high.
• PV Short circuit and PV reverse polarity protection.
• PV reverses the current protection.
• Internal temperature Sensor
• Compensates for absorption and flotation load voltage for temperature.

Real-time Data display options

• Apple and Android smartphones, tablets, and other devices: see the VE. Direct to Bluetooth Smart dongle
• ColorControl Panel

Controller Victron BlueSolar MPPT 150/60-Tr

• Voltage 12/24/48 v Auto Select (software tool needed to select 36 V) Battery
• Nominal current load 60 A
• Maximum power PV, 12v 1a, B) 860 W
• Maximum power PV, 24v 1a, B) 1,720 W
• Maximum power PV, 48v 1a, b) 3,440 W

PV Maximum Open circuit voltage

• 150V absolute Maximum colder conditions
• 145V start-up and maximum performance
• Maximum Efficiency 98%
• Self-consumption 10 MA
• Charging voltage ‘ absorption ‘ default setting: 14.4/28.8/43.2/57.6 V (adjustable)
• Load ‘ float ‘ voltage setting by default: 13.8/27.6/41.4/55.2 V (adjustable)
• Multi-stage loading algorithm
• Temperature compensation-16 MV/°c resp. -32 MV/°c
• Battery protection Reverse polarity (fuse, not accessible to the user)
• PV Reverse polarity/short circuit/over temperature output
• Operating temperature from-30 to + 60 ° C (total nominal power up to 40 °c)
• Humidity 95%, non-condensing
• Data communication port and remote control on/off VE. Direct (see the data communication document on our web page)
• Synchronized parallel operation is not possible

Controller body

• Blue Color (RAL 5012)
• PV 2 Terminals) 35 mm ²/AWG2 (TR models), or Dual MC4 connectors (MC4 models)
• Battery terminals 35 mm ²/AWG2
• Grado de protección IP43 (componentes electrónicos), IP22 (área de conexión)
• Weight 3 kg
• Dimensions (H x W x D) 200 x 250 x 95 mm

Regulator regulations

• Security EN/IEC 62109
• 1a) If more than one photovoltaic power is connected, the controller will limit the input power to the maximum set.
• 1b) voltage PV must exceed Vbat + 5v for the controller to start.
•  Thereafter minimum voltage PV is Vbat + 1v
• 2) MC4 models: will be needed several parallels solar panels

Maximum PV open circuit voltage  – 150V absolute maximum coldest conditions 145V start-up and operating maximum

BlueSolar MPPT 150/60 (12/24/36/48v-60A) features

Maximum efficiency 98%

Self-consumption 10 mA

Charge voltage ‘absorption’ Default setting: 14,4 / 28,8 / 43,2 / 57,6V (adjustable)

Charge voltage ‘float’ Default setting: 13,8 / 27,6 / 41,4 / 55,2V (adjustable)

Charge algorithm – multi-stage adaptive

Temperature compensation -16 mV / °C resp. -32 mV / °C

Protection – Battery reverse polarity (fuse, not user accessible) PV reverse polarity / Output short circuit / Over temperature

Operating temperature -30 to +60°C (full rated output up to 40°C)

Humidity 95%, non-condensing

Data communication port and remote on-off VE.Direct

Parallel operation  – Yes (not synchronized)

Also check:

BlueSolar MPPT 150/45 (12/24/36/48v-45A) Charge Controller

BlueSolar MPPT 150/100-Tr

Brand